Propex Heatsource HS2800 – LPG Air Heater – 2.8kw

From: £821.40

Free Shipping On All Products

Propex 26mm Stainless Steel Exhaust 1.5 Metre


Propex 26mm Stainless Steel Exhaust 2 Metre


Propex Through Boat Hull Exhaust Fitting 26mm


Silicone Glass Exhaust Heat Sleeve - Per Metre

£31.40 each

Warm Air Duct 75mm Per Metre

£18.50 each

Armaflex Ducting Insulation 76mm x 13mm - Per Metre

£19.90 each

75mm Air Heater Duct Silencer

£93.40 each

75mm Air Heater Ducting Connector

£17.80 each

75mm Ducting Tee

£24.80 each

Y Piece Hot Air Ducting Adapter 60mm - 75mm - 90mm

£29.50 each

75mm Air Heater Ducting Bulk Head Lead Through Fitting

£32.90 each

75mm Air Vent

£26.40 each

75mm Air Heater Ducting Stainless Steel External Inlet Grill

£36.80 each

Carbon Monoxide Detector - Kidde 7CO

£23.20 each
Guaranteed Safe Checkout

Propex Heatsource HS2800 – LPG Air Heater – 2.8kw

Propex Heatsource HS2800 ais a 2.8kw blown air heater and is fully thermostatically controlled. It can be run on propane and butane. All units are supplied as standard with a thermostat. The thermostat automatically turns the unit on and off to keep your boat at the desired temperature. Propex Heatsource appliances are fully room sealed and can be mounted in any part of the vessel. The heaters are designed to be quiet in operation without compromising air throughput and heat output.. There will always be some air noise from an air heating system, however, by using high-quality well balanced fans and sealed motors, noise is kept to a minimum.

Heat Output: 2.8kW
Voltage: 12V or 24V versions
Current Consumption: 1.9A continuous running
Air Throughput: 85 C.F.M.
Fuel: Butane or Propane Gas

Included with the heater:

  • 1 x 1 metre combustion inlet pipe
  • 1 x 0.75 meter Stainless Steel Exhaust pipe
  • 1 x Digital Thermostat
  • 3.5 metres thermostat wiring harness
  • 3.5 metres 12v supply harness
  • hose clips, fasteners, screws, inline fuse,¬†instructions, drilling template

Optional extras:

  • Various Lengths Exhausts Pipe
  • Exhaust Insulation
  • Through Hull Skin Fitting
  • Ducting
  • Vents

If you would like this heater fitted by a professional and certified marine heating engineer, please contact our sister company Marine Heating Solutions.

Scroll to Top