Propex Heatsource HS2000 / HS2000E – 2kw LPG / Electric Air Heater

From: £595.00

Free Shipping On All Products

Propex HS2000E - Mains Electric Heating Element


Propex 22mm Stainless Steel Exhaust 1.5 Metre


Propex 22mm Stainless Steel Exhaust 2 Metre


Propex Through Boat Hull Fitting 22mm


Silicone Glass Exhaust Heat Sleeve - Per Metre

£31.40 each

Air Heater Ducting 60mm / Per Metre

£19.80 each

Thermoduct 60mm Air Ducting Insulation - 750mm Length

£18.00 each

60mm Closable Air Heater Vent & Flange

£25.00 each

60mm Non-Closable Air Heater Vent & Flange

£25.00 each

60mm Hot Air Ducting Straight Connector

£26.80 each

60mm Hot Air Ducting Y Piece

£18.50 each

60MM Hot Air Ducting T Piece

£18.50 each

Y Piece Hot Air Ducting Adapter 60mm - 75mm - 90mm


Carbon Monoxide Detector - Kidde 7CO

£23.20 each
Guaranteed Safe Checkout

Propex Heatsource HS2000 Air Heater – LPG With Optional Electric Element

Propex Heatsource HS2000 are blown air heaters and are fully thermostatically controlled. They can be run on propane and butane. All units are supplied as standard with a thermostat. The thermostat automatically turns the unit on and off to keep your boat at the desired temperature. Propex Heatsource appliances are fully room sealed and can be mounted in any part of the vessel. The heaters are designed to be quiet in operation without compromising air throughput and heat output.. There will always be some air noise from an air heating system, however, by using high-quality well balanced fans and sealed motors, noise is kept to a minimum.

– Add On Mains Electric Options

The Heatsource – E options have a built-in electric heating module that can provide 500w, 1kw, or 2kw. This is very useful for boats with a home mooring with a main electric hook-up, or to use surplus solar energy. If you have a backup generator, it can also get you out of trouble if you have accidentally run out of gas. When running on the low 500w setting, the motor noise is kept to a minimum, making it ideal for night time running. The heater comes with a mains cable with a wall plug.

HS2000 Gas Electric
Heat Input: 2.0kW
Heat Output: 1.9kW 500w, 1kW, 2kW
Voltage: 12V or 24V versions 230 volts a.c. 50Hz
Current Consumption: 1.4A continuous running 9 Amps maximum current
Air Throughput: 60 C.F.M. 60 C.F.M.
Fuel: Butane or Propane Gas Mains Electric

Included with the heater:

  • 1 metre combustion inlet pipe
  • 0.75 meter Stainless Steel Exhaust pipe
  • Digital Thermostat
  • 3.5 metres thermostat wiring harness
  • 3.5 metres 12v supply harness
  • hose clips, fasteners, screws, inline fuse, instructions, drilling template

Optional extras:

  • Various Lengths Exhausts Pipe
  • Exhaust Insulation
  • Through Hull Skin Fitting
  • Ducting
  • Vents

If you would like this heater fitted by a professional and certified marine heating engineer, please contact our sister company Marine Heating Solutions.

Scroll to Top