Dickinson Newport – Bulkhead Mounted Diesel Stove – 4.8kw – Fully Customizable Kit

From: £1,585.00

Free Shipping On All Products

Dickinson Single Turn Coil (Back Boiler) -1 kw


Dickinson Wall Liner – Stainless Steel

£38.20 each

0.6 Metre Dickinson Stainless Steel Flue - 3 Inch

£58.00 each

0.6 Metre Dickinson Stainless Steel Flue With Damper - 3 Inch

£172.50 each

Dickinson Flue - 45 Degree Elbow - 3 Inch

£71.30 each

Dickinson Flue Guard - 3 Inch

£120.00 each

Dickinson Flue Roof Collar Deck Fitting - 3 inch


Dickinson Flue Anti Downdraft Cowl - 3 Inch


Dickinson Flue H Cowl - Off Shore Flue Terminal - 3 inch


Dickinson Flue Rain Lid - 3 Inch


Carbon Monoxide Detector - Kidde 7CO

£23.20 each
Guaranteed Safe Checkout

Dickinson Newport – Bulkhead Mount Diesel StoveΒ 

The Newport is a bulkhead mounted diesel stove heater, delivering between 1.9 kW and 4.8 kW. This diesel stove heater is best suited for 30 to 40 ft boats. Fuel Consumption: 0.2  – 0.5Β Β litre per hour.

  • Minimum 4ft or maximum 8ft of chimney is required, a 6ft straight run with no elbows work best.
  • Chimneys 6ft or longer will need a barometric damper.
  • Permanent fresh air vent needed in the cabin with the unit.
  • Creates a dry heat to dry out the moisture inside the vessel.
  • In sailboat installations, this unit must face fore or aft.
  • 12v draft assist fan included. Used for start-up and draft assistance on high fire.
  • The valve is calibrated for diesel but can be re-calibrated for kerosene.
  • Can be fitted with a 1 turn hot water coil for 1 kw water heating.

If you would like this diesel stove fitted by a professional and certified marine heating engineer, please contact our sister company Marine Heating Solutions.


Width 21,6 cm
Height 50,2 cm
Depth 26,7 cm

Scroll to Top